Please note that the course previously scheduled for November 4 - 6, 2020 in Webster (Houston), TX is being transitioned to an online course using Microsoft Teams on the same dates.
Engineers and scientists—who are involved in pilot plant and laboratory units—will learn the essentials and critically examine ways to deal with the hardware and research specific issues not covered elsewhere.
During the course, you will gain a comprehensive overview of the safety issues and concerns involving:
- Gas cylinders and cryogenic liquids.
- Relief systems.
- Glass use.
- Hoses and plastic tubing.
- Gas monitoring.
- Sight glasses.
- Rotating and heated equipment safety.
Who Should Attend?
This course will be valuable to those involved in academic, private, and government research and training laboratories. It will be especially important to those who are:
- New to the pilot plant and laboratory and need to learn about the safety implications of the equipment they will be using.
- Responsible for designing and operating safe pilot plants and laboratories.
- Managing the safety aspects of pilot plants and laboratories.
Note: Although these courses are independent, stand-alone courses, we recommend that Pilot Plant Equipment 1: Fundamentals for Proper Selection be completed prior to attending Pilot Plant Equipment 2: Safe Installation and Operation. The equipment and design focus provided in the first course provides the discussion basis for safe operation in the second. Attend both courses and receive a 10% discount off the enrollment fee of each.
Compressed Gas Cylinders
- Legal and code requirements
- Quantity limitations
- Storage guidelines
- Special cases
- General precautions and recommendations
Cryogenic Gases and Liquids
- Design concerns
- Transportation issues
- Over pressure protection
- Other hazards
- Sizing relief devices properly
- Sizing equations
- Class problems
- Types of relief devices
- spring loaded relief valves
- rupture disks
- hydrostatic head devices
- conservation vents
- balanced bellows relief valves
- rupture pins
- electronic systems
- Advantages and disadvantages of each type
- Choosing the best one for your service
- Miscellaneous relief valve issues
- Vent systems for research
Safety Shutdown Systems
- General considerations
- Matching the safety system design to your needs
- Microprocessor issues
- Using Layer of Protection Analysis to evaluate your safety system effectiveness
- Field device reliability and testing
The Safe Installation and Use of Glass Equipment
- Safety concerns about using glass
- Shielding: the right and wrong ways
- Guidelines for safe use of glass equipment
- Glass and hazardous materials
Hoods and Ventilated Enclosures
- Anatomy of a properly functioning hood
- Issues with hood exhaust systems
- Laboratory exhaust and hoods
- Common problems with hood use and how to avoid them and correct them
- What belongs in a hood and what doesn’t?
- Hood certification and testing
- Hood alarms
- Local exhaust and exhausted enclosures issues: How to use them properly
Hoses and Plastic Tubing
- Issues with laboratory tubing
- Plastic tubing issues
- Flexible metal hose issues
- Guidelines for safe use
Leak Testing vs Hydrostatic Testing
- What are the differences
- When to use each
- How to safely test
Flow Limiting Devices
- Selecting the right type for your application
- Problems with the different types and how to avoid them
Gas Monitoring Systems
- Types of applications
- Types of monitoring systems
- Selecting the right system for your application
- Guidelines for effective use
- Types of sight glasses
- Safety considerations for each type
- Guidelines for safe use of sight glasses
Rotating Equipment: Compressors, Pumps, and Mixers
- Guidelines for safe compressor installations
- Guidelines for safe pump installations
- Guidelines for safe mixer installations
- Ovens and furnace safety
- NFPA 86 requirements
- Heat tracing safety
- Over temperature protection
- Sensor placement concerns
- Complying with electrically classified areas
Wrap Up and Class Questions
Online course and materials.
- CEU: 2
- PDH: 20
Online space opens: 12:45 PM CT
Online class: 1:00 PM – 5:00 PM CT
Online space opens: 7:45 AM CT
Online class: 8:00 AM - 12:00 PM CT and 1:00 PM – 5:00 PM CT
Online space opens: 7:45 AM CT
Online class: 8:00 AM - 12:00 PM CT and 1:00 PM – 4:00 PM CT
Instructor(s)Elaine Andrysick, Richard Palluzi
Team Discount: $1,800 when two or more enroll from the same employer.
Multi-course discount with U324: Pilot Plant Equipment 1: Fundamentals for Proper Selection. Enroll in both for $3,600.
LocationThis is an online course.
If you cannot attend, please notify us by no later than one week before your course begins, and we will refund your fee. Because this course has limited enrollment, cancellation received after this date and no-shows are subject to the full course fee. You may enroll a substitute at any time before the course starts.