Commissioning Building Enclosure Assemblies and SystemsSee upcoming dates
Learn about the commissioning process for building enclosures from predesign through early occupancy. This course will cover specific enclosure assemblies including exterior walls, roofs, windows, and doors.
Who Should Attend?
- Building enclosure commissioning professionals
- Commissioning process authorities and team leaders
- Building owners and managers
Overview of the Commissioning Process
- ASHRAE Guideline 0-2013 and Standard 202-2013
- What is the commissioning process?
- What is a quality delivery process?
- ASHRAE/NIBS Guideline 0-2013
- What occurs in each phase of project delivery?
- Benefits of the commissioning process
Building Science Fundamentals
- The 2nd Law in layman’s terms
- Rain control
- Water vapor transport
- Moisture control
- Interstitial condensation
- Confusion about diffusion
- Moisture and materials and sustainability
- Air transport
- Airflow control
- Pressures and IAQ
- Interaction with mechanical equipment
- Heat transfer
- Heat transfer control
- Thermal bridging
- ASHRAE Standard 160
- Moisture control design analysis
- Integrated design for the control of heat, air, and moisture
- Avoiding mistakes
- Learning from past successes and failures
The Building Enclosure Commissioning Process
- Commissioning process roles and responsibilities
- Pre-design phase commissioning activities
- The OPR and BOD
- The BECx plan
- Design and submittal reviews
- Construction phase verification
- The BECx test plan
- Systems manual requirements
- Owner training
- Lifetime persistence plan
- Close out report
- Overview of NIBS Guideline 3-2012
- Overview of LEED v4 EA Envelope Commissioning
- Overview of ASTM E2813
- Benefits and impact of BECx for stakeholders
- Staffing requirements and cost guidelines
Architectural Details and Interfaces
- Water barriers
- Air barriers and the importance of continuity
- Vapor barriers
- Impact of climate and geography
- Transition and interface details
- Walls and facades
- Windows and doors
- Curtain walls
- Slab on grade, foundations, and basement walls
- Sustainable assemblies/high performance details
- Coordination with other building systems and assemblies
- Enclosure penetrations
Building Enclosure Commissioning Tests
- The BECx test plan
- Test standards and guidelines
- Qualitative and quantitative tests
- Verification means and methods
- Performance criteria
- Laboratory tests
- Component, assembly, and whole building tests
- Water tests
- Air tests
- Testing roofs, flashing, and roof penetrations
- Testing walls, windows, and doors
- Testing penetrations
- Infra-red and whole building testing after construction
BECx Case Study
- Building description
- CxP plan and activities
- Construction sequence
- Construction checklists for BECx
- Mock-ups and constructability review
- Building performance and whole building testing
- Summary of scope of work and the close out report
- Examples of completed checklists and test results
Status of the Industry
"Truly enjoyed the class and learned a lot about the commission process and building science that will benefit my career, construction knowledge, and our company. I look forward to implementing what we learned and plan on attending future courses to learn more."
"I took a great deal of information away that will greatly improve my future projects. I definitely plan to endorse this course to fellow colleagues in our industry."
"The course is well worth the time for both experienced enclosure professionals and those just beginning."
"I recently graduated with an Engineering degree taking multiple Thermodynamics, Heat Transfer, and HVAC classes. Your class helped me understand a number of things that those classes didn’t get. I can’t tell you how much I appreciate that. Great class, great instructors, and I’ll be recommending it to everyone I can."
"The course refreshed my interest in building science, renewed my interest in the specifics of building enclosure systems, details, and products and raised my skill set and confidence with ASHRAE guidelines, ASTM standards, and testing protocols."
Fiona Aldous is a Principal with Wiss Janney Elstner Associates. She has performed comprehensive building enclosure commissioning on numerous buildings and a variety of building enclosure projects throughout North America. Her experience also includes design, detailing and installation of various high-performance enclosures, comprising curtain wall and window systems, air barriers, waterproofing of below-grade and plaza systems, low slope roofs and the interfaces of the various enclosure components.
Fiona holds a post-graduate Master of Architecture, Bachelor of Architecture and Bachelor of Science degrees. She was a prime author of the BECx industry's founding document, NIBS/ASHRAE Guideline 3 - The Building Enclosure Commissioning Process. As a member of ASHRAE, she actively serves on technical committees encompassing Building Materials and Building Envelope Performance and Building Commissioning. She serves as the Building Enclosure Council's (BEC) National Chair and is a member of the Building Enclosure Technology and Environment Council (BETEC). She is a founding member of the Building Enclosure Commissioning Collaborative (BECxC) and works to educate and promote the implementation of BECx.
Fiona has authored articles and papers, taught classes and provided presentations on various aspects of the building enclosure and commissioning
Joe Lstiburek, PhD, PEng, is a forensic engineer who investigates building failures, and an internationally recognized authority on moisture-related building problems and indoor air quality, including rain penetration, air barriers, vapor barriers, air quality, durability, and construction technology. He is the former chairman of ASTM E241–Increasing the Durability of Building Assemblies from Moisture-Induced Damage and a reviewer of Chapters 21 and 22 of ASHRAE Handbook of Fundamentals. He is an ASHRAE fellow and member of ASHRAE 62.2–Ventilation for Acceptable Indoor Air Quality. He has appeared on PBS’ NOVA (“Can Buildings Make You Sick?”). He is the author of the US Department of Energy Handbook on Moisture Control and a special contributor to the EPA guidance document on Building Air Quality: A Guide for Building Owners and Facility Managers.
Chris is recognized as an expert in the field of building monitoring as well as enclosure and building systems testing. Chris’s formal education in architecture and engineering is balanced by two decades of building enclosure design and testing experience.
Chris oversees much of the work done through RDH Building Science Laboratories, and he regularly consults on the development of experimental test programs for academic institutions, building product manufacturers, and government agencies.
Examples of Chris’s research work include the Thermal Metric Project, a multiyear investigation of thermal performance in full-scale wall assemblies; and the development of an apparatus and test method that measures dense-pack airflow resistance to support the development of the Building Performance Institute’s test standard BPI-103 and material standard BPI-102.
Before joining RDH, Chris was a founding principal of Building Science Consulting Inc. and a founding partner of Balanced Solutions Inc., an innovative Canadian building science RD&D consultancy.
Upcoming dates (0)
Take this course when it’s offered next!
Commissioning Building Enclosure Assemblies and SystemsCourse #: RA01167
Commissioning Building Enclosure Assemblies and SystemsDate: Tue. November 12, 2019 – Thu. November 14, 2019
Fee covers morning and afternoon breaks, scheduled lunches, and course materials
- CEU: 2.1
- GBCI: 21
- PDH: 21
- LU/HSW: 21
Commissioning Building Enclosure Assemblies and SystemsDate: Tue. June 04, 2019 – Thu. June 06, 2019